Rebar cutting machines SIMA CEL series, etc.

Rebar cutting machines with a capacity of 1.5 to 4 kW are used for cutting corrugated and smooth rebar. The diameter of the reinforcement varies from 32 to 45 mm. The reinforcement is fed into the cutting zone manually, for this it is necessary to pass the reinforcement between the knives and lower the lever in the right place or press the pedal. The machines are equipped with transport wheels for ease of movement. Overload protection and an emergency stop button ensure reliability and safety when using the machine.

REBAR CUTTING MACHINE CEL 30

• Rebar diameter: up to 25 mm
• Drive: 380 V
• Power: 2.0 kW
• Cutting speed: 105 units/min

REBAR CUTTING MACHINE CEL 35

• Rebar diameter: up to 32 mm
• Drive: 380 V
• Power: 3.0 kW
• Cutting speed: 100 units/min

REBAR CUTTING MACHINE CEL 36 P

• Rebar diameter: up to 36 mm
• Drive: 220/380 V
• Power: 1.5 kW
• Cutting speed: 110 u/min

REBAR CUTTING MACHINE CEL 42 P

• Rebar diameter: up to 42 mm
• Drive: 220/380 V
• Power: 3 kW
• Cutting speed: 88 units/min

REBAR CUTTING MACHINE CEL 45

• Rebar diameter: up to 40 mm
• Drive: 380 V
• Power: 4 kW
• Cutting speed: 60 units/min

REBAR CUTTING MACHINE CEL 52 P

• Rebar diameter: up to 52 mm
• Drive: 220/380 V
• Power: 4 kW
• Cutting speed: 88 units/min

REBAR CUTTING MACHINE CEL 55 P

• Rebar diameter: up to 55 mm
• Drive: 220/380 V
• Power: 4 kW
• Cutting speed: 50 units/min