Seam Slicers SIMA series COBRA, TRENCHER, etc.

SEAM SLICERS

Seam cutters SIMA are equipped with Honda gasoline engines or Lombargini diesel engines. The construction of the machines is made of strong thick steel, which is painted with epoxy polyester, which prevents the formation of corrosion. The controls are located in a convenient place for the operator and are intuitive. Each model is equipped with a roomy plastic water tank, the liquid from it flows directly into the cutting zone by gravity. Cutting discs with a diamond segment with a landing hole of 24.5 mm and a diameter from 300 to 700 mm are installed on the cutters.

SEAM SLICER COBRA 35

• Engine: Petrol / Honda
• Power: 9 / 13 HP
• Diameter of the disc: 350 mm
• Cutting depth: up to 105 mm

SEAM SLICER COBRA 40

• Engine: Petrol / Honda
• Power: 13 HP
• Diameter of the disc: 400 mm
• Cutting depth: up to 120 mm

SEAM SLICER COBRA 50

• Engine: Petrol / Honda
• Power: 13 HP
• Diameter of the disc: 500 mm
• Cutting depth: up to 155 mm

SEAM SLICER COBRA 60

• Engine: Petrol / Diesel
• Power: 13 - 20 hp
• Diameter of the disc: 600 mm
• Cutting depth: up to 200 mm

SEAM SLICER COBRA 700 MATIC

• Engine: Diesel
• Power: 26 hp
• Diameter of the disc: 700 mm
• Cutting depth: up to 260 mm

SEAM SLICER COBRA 30 PRO

• Engine: Petrol
• Power: 5.5/6 HP
• Diameter of the disc: 350 mm
• Cutting depth: up to 135 mm

SEAM SLICER COBRA 35 PRO

• Engine: Petrol
• Power: 8.5 hp
• Diameter of the disc: 400 mm
• Cutting depth: up to 160 mm

SEAM SLICER COBRA 40 MEKANO

• Engine: Petrol
• Power: 14 HP
• Diameter of the disc: up to 400 mm
• Cutting depth: up to 132 mm

SEAM SLICER COBRA 50 MEKANO

• Engine: Petrol
• Power: 14 HP
• Disc diameter: up to 500 mm
• Cutting depth: up to 182 mm

SEAM CUTTER DOUBLE TRENCHER 60/70

• Engine: Petrol / Diesel
• Power: up to 23 hp
• Diameter of the disc: up to 400 mm
• Cutting depth: up to 120 mm
• With two discs for cutting asphalt under trenches